- #Csr bluesuite 2.5 download install
- #Csr bluesuite 2.5 download zip file
- #Csr bluesuite 2.5 download drivers
- #Csr bluesuite 2.5 download full
- #Csr bluesuite 2.5 download software
NOTE: Make sure you have backed up the settings as pre the previous step before doing this, as there is no getting them back after we flash the firmware! Flashing the firmware So now we want to take the RN-42 firmware we got in the previous step and flash it onto the HC-05. You should now be left with 3 files, as shown in the last picture.
This will take about 1 minute to backup. Choose a location and a name for the setting file, I recommend keeping it together with firmware flash. Select SPI BCCMD and then select your FTDI board in the Port drop down. Go to the start menu again and open CSR Bluesuite 2.6.2 -> PSTool. When it's finished, click the Start Processor button and close BlueFlash. This will take about 2 minutes to backup. Choose a location and a name for this backup. This will enable some other buttons, then click the Dump button. You should now see a status of "Processor Running", if you don't see the message double check your wiring and also check for shorts between cables. 
Select your FTDI board from the drop down (if it's not automatically selected), its the one labeled "FT232R. 
Go to your start menu open CSR Bluesuite 2.6.2 -> Blueflash. The first thing we want to do is backup the firmware that is currently on the HC-05 module in case you ever want to return it to its original state, and also we need to backup the modules current settings. That't it for installation, now the fun beings! #Csr bluesuite 2.5 download install
Select the libusbK driver and click Install Driver. If you don't see it, go to Options and then List all devices. Select the FTDI module from the drop down (should be called FT232R USB UART). Plug your FTDI board into your computer (Note: I had issues flashing when using a USB hub, so try plugging it in directly to the computer if you can). Right click in the folder and paste the file you copied earlier, you should now have both the new usbspi.dll file where the old one was. In this folder there is a file called usbspi.dll, rename it to something else (I called it usbspiBACKUP.dll). #Csr bluesuite 2.5 download software
Navigate to where you installed the Blue Suite software (for me it was C:\Program files(x86)\ CSR\BlueSuite 2.6.2). Right click on the usbspi.dll file and copy it. #Csr bluesuite 2.5 download zip file
Extract the zip file that was downloaded.Install the Blue Suite software first (take note of where you choose to install it if you change it from the default).
#Csr bluesuite 2.5 download drivers
Zadig Driver Installer - This is for installing a generic driver for you FTDI module that the custom drivers need.
#Csr bluesuite 2.5 download full
The readme on this GitHub project is full of good information so if you run into any issues it's worth checking it out Go to the releases link up the top and download the latest zip file.
FTDI Module Drivers - These are the custom drivers that allow us to use the FTDI module to flash the Bluetooth Module. When you login, revisit this link again to be brought to the downloads page After you register they will email you your password. Blue Suite Software - This requires you to register, it says you need a business email address, but a Gmail one worked fine for me. So first we want to download the following: Next we want to download and install the different bit of software we need for the flashing process. It's worth pointing out that the RN42, while it is a bit more expensive than the HC-05, (about $15 more), there is significantly less effort involved in using one directly! So if you are interested in using a Bluetooth HID module in your project, definitely consider that as a good option! Just personally I really like the thought of upgrading something to do things it wasn't really intended to do! With a Bluetooth HID module you can connect to your arduino projects to your Cell phone or computer and get it to behave like a Mouse/Keyboard or game pad device. The feature we are most interested in is that the module can work as a HID device. They do however use the exact same chip as modules that are more feature rich, so it is possible to re-flash them with the firmware of these modules to get the same features. They are pretty basic modules though and don't support too many features. The HC-05 and HC-06 are really common Bluetooth modules used in Arduino projects, they are very easy to connect to and are only about $3 each.
0 kommentar(er)
